Few people were born with additional arms, and even fewer of us can ignore the enticement of additional toys. Due to these two universal maxims, woodworkers must constantly be seeking out more exotic clamps. Prior to setting out on the quest for the strangest-looking clamp, though, you need to ensure that your wood shop has all the basic needs covered first. There are three styles of clamps made to help you through general woodworking tasks; the bar clamp, the C-clamp and the band clamp. Don’t forget to look at the different Air Compressors & Air Tools.
Bar clamps are probably the most familiar clamps linked with woodworking. They consist of an adjustable jaw, a steel bar of varying dimensions, in addition to a second jaw which can float along the bar. The second jaw can be attached at a position against the bar, and the adjustable jaw may be tightened with a hand screw.
This sort of clamps are very convenient for woodworking thanks to their ability to adjust to wide or narrow projects. Pony brand steel bar clamps are well-made and inexpensive products for the home woodworker because they are quick to clamp and un-clamp and the multiple-disc clutch will hold the adjustable jaw firmly at any point along the bar. Also, be sure not to miss the different Industrial Compressors.
C-clamps would also be very convenient for woodworking, and they are really more widely used than bar clamps because C-clamps are normally used by plumbers and welders too. The clamps are manufactured from a large piece of metal which resembles a “C”, and a movable metal pad attached to the end of a hand screw. Because C-clamps are most often manufactured from cast iron, a woodworker ought to shield his stock by using pads between the C-clamp and the material surface. In case you decide to invest in a few Irwin Quick-Grip C-clamps, these models already have wide swivel pads which cut down on marring while simultaneously increasing the clamp’s stability.
Band clamps are the clamps which woodworkers depend on when the other clamps don’t work. The simplest type of band clamp is a very long piece of polyester or cotton webbing that has been connected to a “buckle” with a ratcheting cinch. The webbing is meant to be wrapped around the outside of different shapes, secured through the buckle and snugged down with the cinch. Jorgenson markets a very basic band clamp which has a 15 foot band and ratcheting cinch. If you could use a band clamp with corner clips for use with picture frames, Merle makes a clamp which has pivoting jaws in addition to quick release corners.
Clamping and gluing are almost always a necessary phase in any woodworking job, so you actually should have some all-purpose clamps in your shed routinely. Fortunately, no one is restricted to the three types of clamps we’ve explored, but those clamps ought to form the central group of your naturally increasing inventory of woodworking clamps.
No comments yet.